QUICK USER GUIDE
After you turn on the stirrup bending machine, the display will show the information of Phuc Long company and then stop at language selection of Vietnamese and English
Firstly I would like you all to watch a video of our stirrup bending machine
After selecting language, face page comes. There are some parameters on this page with their meanings as follows:
On the first setting page: There is a “Setting” field on face page
On the setting-2 page: There is a “Setting 2” field in “first setting” page
Note: Users should not change these parameters. Users should understand or refer to Phuc Long technicians before any changes.
HOW TO MAKE STIRRUPS AUTOMATICALLY.
Mode of machine should be “Mode Man” and switch (1,2,3) is at number 1, then you can feed iron wire into first roller frame, second frame and main roller frame and then touch the “Forward” button to move iron wire forward through the roller system to the hole of cutter at the end. You should press down the roller system deliberately and check all rollers which contact iron wire well enough
Touch the “Mode Man” to convert to “Mode Auto” then the cutter will cut off the iron wire odd to get machine ready for automatic operation
Touch the field of “Shape Products” and select the shape of stirrup you want to make and then touch the “Return” field. Then you can set the some parameters of stirrup such as quantity, all sizes of stirrup.
Finally you press the “Start” button for making stirrups automatically
HOW TO TEST EACH PARTS AT MODE MAN
Make sure that you touch the Mode field into “Mode Man” and turn the switch 1,2,3 with their functions accordingly as follows:
Switch 1: Moving iron wire forward and backward manually by pressing the button of “Forward” and “Backward”
Switch 2: Moving the bender down and up manually by pressing the button of “Forward” and “Backward”
Switch 3: Moving the cutter down and up manually by pressing the button of “Forward” and “Backward”
HOW TO ADJUST THE ANGLE
Paying attention to the bending arm tail, we put a sensor (Green) near this tail (inside machine frame). Its function is to stop the bending arm at the right position as you see the angle as wanted.
We use a knob on the top of machine to control this sensor. When turn this knob clockwise, the sensor will go higher and higher that means the angle will become more acute and vice versa the angle will become more obtuse when you turn the knob anti-clockwise.
Video: Stirrup Bending Machine - Made by Phuc Long
Đội ngũ tư vấn kỹ thuật chuyên sâu
Báo giá cạnh tranh trên toàn quốc
Hàng có sẵn, giao ngay trên toàn quốc
Bảo hành tận nơi trên toàn quốc